JB-12 Epoxy Coated Zinc Coated TMT Bars

JB Engineering Zinc Coated /Epoxy Coated TMT Bars are highly corrosion resistant variant of steel bars which are protected by Fusion Bonded Epoxy coating. Fusion Bonded Epoxy coating, commonly used to protect concrete TMT bars, steel pipes, piping connections etc. used in construction. Fusion Bonded Epoxy coatings are in the form of dry powder at normal atmospheric temperature. The powder is applied electrostatically to the surface of cleaned steel bars and cured to form a protective film after undergoing various chemical processes. The epoxy coated bars last longer due to the protective Application and contribute to the quality of construction.

JB Engineering Fusion Epoxy Coated TMT Bars are available in grades 500D/550D/600D/670/800/950/1050 Mpa & sizes from 6mm to 50mm.

Advantages of JB Engineering Fusion Bonded Epoxy Coated bars:


Steel Dowel Bars

ASTM A615 Grade 60 Steel Dowel Bars

JB Engineering Rock Bolts is a leading manufacturer and exporter of Steel Dowel Bars that are being designed as per the national and international standard quality of raw materials. These ASTM A615 Grade 60 Steel Dowel Bars are used to carry out the transmission of load from one block to another, at the same time letting the axial thermal development alongside with the axis of dowel. These BS 4449 Epoxy Coated Dowel Bars are by and large made from plain round material, where they offer a hard-wearing and corrosion resisting elucidation to connections in tangible or other operational applications.

Steel Dowel Bar Gr 250, BS 4449 Epoxy Coated Dowel Bars, Hot Rolled Plain Steel Dowel Bars Manufacturer In India.

Steel Dowel Bars
Steel Dowel Bars
gr 60 dowel bar
Grade 60 Steel Dowel Bars
gr 250 dowel bar
Grade 250 Steel Dowel Bars
epoxy coated dowel bar
BS 4449 Epoxy Coated Bars

Dowel bars are Uses / Applications

  1. To transfer the load from one slab to its adjaacent slab such that two consecutive slabs move together and reduce impact loading developed by the slabs by their independent movement.
  2. To reduce joint faulting and corner cracking.
  3. To improve the performance of pavement joints.

Advantages Of Dowel Bars:

  1. Reduce deflection and stresses.
  2. It increases the load-carrying capacity of slabs.
  3. It increases the initial pavement life.

Hollow Rods - Bars / SDA Rods-Bars IN INDIA

SDA Bar In India is a bolting solution for different ground conditions including sand, gravel, silt, and clays, and in soft to medium fractured rock formations. Our drill bits are available in different designs and diameters and thread types. Our SDA Bar’s are compatible with most standard rock drilling equipment.

Self-drilling anchors are the advanced type of fully threaded hollow steel tube rods. SDA is a fully threaded rod with an inner and outer diameter hollow steel tube. It is provided with a sacrificial drill bit at the end to facilitate the drilling process, coupler to join two SDA bars, screw nut, base plate, etc. The hollow steel tube has one side sacrificial drill bit and, at another end, tied with nut and steel base plate. A hollow steel tube is placed in the center of the drill hole using a centralizer to maintain its position. The grout, which covers the SDA periphery, protects the SDA Rod under aggressive environment conditions with simultaneous grout ground and grout bar interaction throughout the threaded bond length. Self-drilling sacrificial drill varies based on the rock or soil conditions.

With our immense expertize in this particular domain we are involved in trading wholesaling and supplying a commendable range of Hollow Rod.

Applications of SDA Rod

Slope stabilization

Self-Drilling Anchors are very suitable for weathered or un-consolidated rock stabilization. This technique is a more superior form of stabilization because the SDA technique is a relatively easy and fast method of installation compared to the outdated methods.

Foundations with micro piles

SDA Bar can be used like monopoles and micropile types because these are drilled piles composed of steel reinforcement with injected grout. These anchors are used like micropile type to stabilize the ground and related foundation problems. These anchors are suitable for tension and compression loads at varying ground conditions.


Self-drilling anchors bolts in India are most suitable for the stabilization of tunnel strengthening works. Mostly for the soft rock and overburden soil conditions, the SDAs are apt for rooftop protection.

The Below pictures describe the implementation of SDA as a reinforcing stabilization element for various works.
SDA Bar and Rod


JB Engineering Rock Bolts holds vast experience in this domain and is involved in manufacturing of a wide assortement of Full Threaded Hot Rolled Bars & Tie Rods. Thease Bars are used for anchor systems used for tunnels, transmission lines and antennas, excavation shoring, retaining walls, dam tie-downs and buried structures, turbine tower anchor bolts sysems etc.

Our Hot Rolled Threaded Bar offered can be made available by us in diffrent finish sizes. Hot Rolled Threaded Roads are long rods with continuous threading entire its length. Manufactured from corrosion resistant Stainless Steel, they are availbale in a wide range of diameters, lengths, and surface finishes. They are engineered ruggedly to resist stress and abrasion and are unaffected when in contact with harsh chemicals, solvents, acids, dyes, and sterilizing solution. These threaded tie rods & bars features corosion resisance, high-temperature strength, scaling resistance, and low-temperature toughbess.


Manufacturing HRB335 HRB400 HRB500 Rebar for Building Construction Iron Deformed Steel Bar Rod Hot Rolled Steel


Factory direct sales 6mm 8mm 10mm 12mm 16mm 20mm Hot Rolled Deformed Steel Bar Iron Rod for Construction Rebar Steel


High quality Customized Diameter 6mm 8mm 10mm Hot Rolled Deformed Steel Bar Rebar Steel Iron Rod for Construction


6mm 8mm 10mm 12mm 16mm 20mm Hot Rolled Deformed Steel Bar Rebar Steel Iron Rod for Construction Rebar Steel


Construction Building Hot Sale 10mm 12mm Concrete Iron Rod Price HRB400 rebar steel rebar steel grade 60 tie rods rebar


Cold/Hot rolled Scaffolding Threaded Formwork Steel Concrete Tie Rod 16mm


15/17mm hot rolled formwork tie rod with 190KN breaking load


Construction Building Hot Sale 10mm 12mm Concrete Iron Rod Price Hrb400 Rebar Steel Rebar Steel Grade 60 Tie Rods Rebar


Formwork Bolt Nut Tie Rod Wing Nut Cold Rolled Adjustable Golden Zinc Tie Rod for Building


Wire Coils Rod Hot Rolled Stainless Galvanized Steel Drawn Wire Free Cutting Steel SAE 1006 SAE1008 Q195 Q235 Construction